60~120 meter high aviation obstruction led light, Obstruction LED Lamp, LED high Intensity White, red, green Strobe with 155mm diameter Beacon

60~120 meter high  aviation obstruction led light, Obstruction LED Lamp,  LED high Intensity White, red, green Strobe with 155mm diameter Beacon.

The LED high Intensity White Strobe and Red Beacon is designed for the lighting of radio towers, wind generators and other obstructions to aerial navigation, as specified by the FAA and FCC. It uses LED technology for light output the Red Beacon Strobe. Unlike conventional Xenon flashtube technology, little or no maintenance is required during its lifetime. Working voltages of less than 200VDC are significantly less than those of Xenon flashtube designs; therefore, this system represents an advance in safety. The LED beacon operates on mains voltage 110/230V AC. The power supply / control box can be located up to 550 ft away from the light engine, such as at the base of the tower. It can be found far away 10 km at the night.
The high-intensity aviation obstruction light consists of a 155mm diameter beacon lens, an aluminum alloy cast lamp holder, a microcomputer chip integrated circuit controller, and an LED lamp. It can produce extremely strong flash at an instant. The 155mm diameter monocone lens is a Fresnel lens injection-molded from polyacrylic plastic. When the lamp is focused, the lens can focus, which can greatly increase the intensity of light and expand the angle of emission. This aviation obstruction light has automatic daylight control switch function. It automatically turns off during the day and automatically turns on at night or on cloudy days (Photosensitivity is adjustable from 50~300LX).