Single address / broadcast DALI Rotary dimmer with DALI BUS POWER SUPPLY DALI signal lighting Dimmer switch for simple DALI compatible light fittings

Single address / broadcast DALI Rotary dimmer with DALI BUS POWER SUPPLY DALI signal lighting Dimmer switch for simple DALI compatible light fittings

Single address Broadcast DALI
Broadcast DALI is the simplest way to control DALI lighting when individual addressing or grouping of lights is not required. Using this simple means of control, the DALI lights operate together.
There are also situations in which lighting only needs to be switched on or off, or needs to be dimmable. For these applications DALI Broadcast will suffice. It’s a simpler solution, both in terms of use and installation. The word broadcast speaks volumes, because this means that all the fixtures are controlled simultaneously from a single point. The solution can be wired, wireless or a combination of the two. The individual fixtures don’t need to be programmed separately.
DALI broadcast controllers, dependent on option chosen, can control from 1 to 100 drivers on a single DALI line/universe. This allows ‘group’ (broadcast) control via a rotary switch, push button, scene control, or similar. which can be controlled with a physical switch or an app for mobile phones or tablets.

Future:

1)DALI dimming way: dimming by broadcasting direct arc power level

2)Max output current:65mA DC .It could be connected 32 DALI drivers if maximuin consumption current is 2mA of each driver. 3)Led indicator : When the dimmer is ON ,the led indicator is OFF. When the dimmer is OFF ,the led indicatore is ON

Manual:

Short press the dimmer is ON/OFF When the dimmer is ON ,long press the rotary key to dim the brightness up or down. When the dimmer is off ,long press the rotary key to turn on dimmer and dim the brightness as well. When the dimmer is ON ,rotate the rotary key to fine brightness.

1.AC Input directly and provide 65mA output current to the DALI signal line 2.With memory function, when power is on, it could automatically return to the state before power-off. 3.Add a power-off detection circuit, EEPROM could be done only if power failure , to avoid continuous reading and writing EEPROM in order to extend the service life of the dimmer

Output Voltage 16V (+/-5%)