Who's Online

There currently are 210 guests online.

WS2815 Resume BreakPoint Addressable LED rigid strip 60 leds 12V

(image for) WS2815 Resume BreakPoint Addressable LED rigid strip 60 leds 12V
WS2815 Resume BreakPoint Addressable LED rigid strip 60 leds 12V
(image for) WS2815 Resume BreakPoint Addressable LED rigid strip 60 leds 12V
WS2815 Resume BreakPoint Addressable LED rigid strip 60 leds 12V
  • Model: WS2815-60LED-Resume-Break-szsh
  • Shipping Weight: 0.3 lbs

(image for) Ask a Question

Starting at: $8.10

Please Choose:

Housing or Cover

Ingress Protection Rating

Min:  5
*Mixed OFF
Add to Cart:

60 led each meter, The unit price is each meter. WS2815 LED Strip Individual Addressable Light SMD5050 RGB Strip Full Color LED Pixel Strip DC 12V, WS2815 LED flexible strip, WS2815 LED rigid strip. You can buy our Addressable LED strip controller to control this RGB Pixel LED Strip. This is Addressable 5V Resume Break Point Led Light Strip. IC is designed with double signal two data line two power lines 256 gray scale high brightness fast data transfer fast screen refresh etc it have the advantage that when one of the pixel broken will not affect another led pixel working with the controller you can achieve monochrome gradient water horse racing text numbers chase English pictures animations video any effection and so on

Description of WS2815
Intelligent control integrated LED light source
12V DC Power-supply
Dual-signal wires version
Signal break-point continuous transmissio

Features and Benefits
The control circuit and the LED share the only power source. 
12V DC power supply, t ere are a decrease of the whole operating current, a decrease in voltage drop, and furthermore an increase consistency of three-color mixing even long distance signal transmission.
The control circuit and RGB chip are integrated in a 5050 components, to form an external control pixel.
Using the built-in signal reshaping circuit to achieve the signal waveform shaping, and no distortion of waveform of signal takes place. 
Built-in power-on reset and brown-out reset circuits. 
The gray levels of each pixel are of 256 levels, which achieves “256*256*256=16777216” full-color display, and the refresh frequency reaches to 2KHz/s. 
Serial cascade interface, data receiving and decoding depend on just one signal line.
Dual-signal wires version, signal break-point continuous transmission.
Any two point the distance more than 3m transmission signal without any increase circuit. 
When the refresh rate is 30fps, cascade numbers are far more than 1024 points. 
Data transmitting at speeds of up to 800Kbps. 
Good color consistency reliability, high cost-effective.

Guardrail tube series, point light display series, flexible/rigid strips series, module series applications. ? 
Lighting stage costumes, innovative gadgets or any other electronic products. General description

General description
WS2813 is an intelligent control LED light source that the control circuit and RGB chip are integrated in a package of 5050 components. Its internal include intelligent digital port data latch and signal reshaping amplification drive circuit. Also include a precision internal oscillator and a 12V voltage programmable constant current control part, which achieves highly consistent color effect. 

The data transfer protocol use single NZR communication mode. After the pixel power-on reset, the DIN port receive data from controller, the first pixel collect initial 24bit data then sent to the internal data latch, the other data which reshaping by the internal signal reshaping amplification circuit sent to the next cascade pixel through the DO port. After transmission for each pixel, the signal to reduce 24bit. Every pixel adopts auto-reshaping transmit technology, making the pixel cascade numbers are not limited to the signal transmission, only relate to the speed of signal transmission. 

The BIN receives the data signal, and then compare the data with the DIN side after phagocytosis of 24bit data, if DIN
do NOT receive the signal, then switching to BIN for receiving the input signal, which ensure that any the IC's damage does not affect the signal cascade transmission and make the BIN in state of receiving signal until restart after power-off. Refresh Frequency updates to 2KHz, Low Frame Frequency and no Flicker appear in HD Video Camera. 300us or more of reset time, it won’t cause wrong reset while interruption, it supports the lower frequency and inexpensive MCU.

As the individually addressable pixel, each LED is cuttable.

IC: WS2815    
FPCB Color: White/Black
IC Quantity: 60 IC/meter
Max Power: 18w/m
PCB Width: 10mm    
Channel Order: RGB
LED Type:    SMD5050    
Gray Scale: 256
LED Quantity: 60 LEDs/meter    
IP rate: IP20, IP65, IP67

Your IP Address is:
Copyright © 2024 Powered by Zen Cart