Touch reverse phase dimmer wall switch MOSFET LED dimmer switch

Capacitive Touch Dimmer, Touch LED bulb dimmer wall switch reverse phase IGBT dimmer, 200W led bulb dimmer wall switch.Touch LED bulb dimmer wall switch reverse phase IGBT dimmer. CE approval.  MOSFET dimmer switch, MOSFET PWM LED dimmer switch, IGBT dimmer, Dimmer wall switch, reverse phase dimmer switch, Reverse phase Dimmer Lutron replacement, Reverse phase dimming wiring diagram, MOSFET PWM LED dimmer.

MOSFET dimmer switch IGBT Dimmer:
MOSFET and IGBTs (Insulated Gate Bipolar Transistors) have the ability of being turned off anytime during the phase (TRIACs and SCRs can only be turned off during the zero-crossing of the waveform). Therefore, IGBT Dimmer is complicated, It can be phase controlled dimmer, sine wave dimmer.
a.)FPC IGBT Dimmer and RFC IGBT Dimmer, IGBT Phase controlled dimmer (advanced types of phase control dimmers):
All of Triac dimmer have one thing in common: the phase control waveform is far from ideal for dimming them. In many cases the load will perform poorly; in extreme cases the load (and possibly the dimmer) will be damaged. In the last decade, more advanced types of phase control dimmers have been produced using a type of power semi-conductor called an IGBT.
IGBT Phase controlled dimmer can be "Forward phase controlled" dimmer call as FPC IGBT Dimmer and "Reverse phase controlled" dimmer call as RFC IGBT Dimmer.

Applying the tangential principle can reduce the effective value of the output voltage, thereby reducing the power of ordinary loads (resistive loads).

The thyristor dimmer has the advantages of high adjustment accuracy, high efficiency, small size, light weight, and easy remote control, etc., and it is dominant in the market.

RFC IGBT Dimmer are higher work efficiency, stable performance, and low dimming cost.Perfect for residential and Commercial indoor dry wall mount applications up to 110 watt (1A, AC110V )220 watts (1A, AC 220V)LED lights ‎

Using MOSFET instead of IGBT or TRIAC completely eliminate the EMI.  
Compatible with EMC standard EN55015: 2013 EN61547: 2009 EN61000-3-2: 2014 EN61000-3-3: 2013.
Compatible with LVD standard EN61347-2-11: 2002 EN61347-1: 2015 EN62493: 2015
CE, EMC, LVD certificated.

Item Weight    0.4 lbs
Product Dimensions : L74×W120×H41.8 mm, ‎4.7 x 3.1 x 2.3 inches
Country of Origin    ‎China
Color    ‎Black
Finish   OEM clor acceptable  ‎White/gray/ivory
Static power consumption < 3 watt
Voltage    ‎AC 90-240 Volts 50/60 Hz
Maximum Output Current: 1000MA
Connection method: co-anode
Power Source    ‎Corded Electric
Switch Style    ‎Touch Switch

User manual for Triac Dimmer
Single Pole & 3 way LED Dimmer 
AC 100-240V 50~60Hz 
Important Notes, Please read before installing.
1.Use only with 120V incandescent, CFL or LED light fixture.
2.Turn off power at circuit breaker or fuse before wiring.
3.Only3-way switch can be used with 3-way dimmer
4.Use copper wire only
5.For supply connection, use wires rated for at least 75°C 
Caution-To reduce the risk of over heating and possible damage to other equipment, do not install to control a receptacle, a motor-operated appliance or a fluorescent lighting fixture or a transformer supplied appliance.

Multigang installations
 In multi-dimmer installations, the capacity of dimmer is different, Refer to the below chart.
Each control has inside sections removed

Installation
1.Turnpoweroff
2.Wiring the dimmer Single-pole Wiring
Three-way Wiring: 
3.Mounting dimmer to wallbox
Push wires carefully into the wallbox, install wallplate.
4.Turn power on