300W Slide LED bulb dimmer wall switch replace Lutron dimmer

ETL cETL approval 300W led bulb dimmer wall switch. 0-10V dimming or SCR Trac dimming option.  As Lutron dimmer replacement.
SCR ( Triac ) dimming has been used for dimming methods of incandescent lamps and energy-saving lamps earlier. It is also the most widely used dimming method for LED dimming.

SCR dimming is a kind of physical dimming. Starting from AC phase 0, the input voltage is chopped, and there is no voltage input until the thyristor is turned on.

Its working principle is to produce a tangential output voltage waveform after passing the input voltage waveform through the conduction angle shear wave.

Applying the tangential principle can reduce the effective value of the output voltage, thereby reducing the power of ordinary loads (resistive loads).

The thyristor dimmer has the advantages of high adjustment accuracy, high efficiency, small size, light weight, and easy remote control, etc., and it is dominant in the market.

The advantages of SCR dimming are higher work efficiency, stable performance, and low dimming cost.

Perfect for residential and Commercial indoor dry wall mount applications up to 600 watts of most dimmable CFL or LED lights, Led ceiling panel, high bay ufo, tube light fixtures
Using for <600 watt incandescent bulb,  < 120 watt Halogen light bulb,  <150 watt dimmable triac led bulb and CFL bulb.    ‎
Item Weight    ‎3.2 ounces
Product Dimensions ‎4.7 x 3.1 x 2.3 inches
Country of Origin    ‎China
Color    ‎White
Finish    ‎White/gray/ivory
Power Source    ‎Corded Electric
Voltage    ‎AC 100-240 Volts
Switch Style    ‎Slide Switch

User manual for Triac Dimmer
Single Pole & 3 way LED Dimmer 
AC 100-240V 50~60Hz 
150W for dimmable LED/CFL, 600W for dimmable incandescent lamps

Important Notes, Please read before installing.
1.Use only with 120V incandescent, CFL or LED light fixture.
2.Turn off power at circuit breaker or fuse before wiring.
3.Only3-way switch can be used with 3-way dimmer
4.Use copper wire only
5.For supply connection, use wires rated for at least 75°C 
Caution-To reduce the risk of over heating and possible damage to other equipment, do not install to control a receptacle, a motor-operated appliance or a fluorescent lighting fixture or a transformer supplied appliance.

Multigang installations
 In multi-dimmer installations, the capacity of dimmer is different, Refer to the below chart.
Each control has inside sections removed

Installation
1.Turnpoweroff
2.Wiring the dimmer Single-pole Wiring
Three-way Wiring: 
3.Mounting dimmer to wallbox
Push wires carefully into the wallbox, install wallplate.
4.Turn power on 

Only incandescent dimmer rating:
Cat. No.: Slide/Decorator
Single gang rating: 300w