22W 12V car led replacing turn signal bulb with led directly

22 watt color temperature 1816 Kevin warm white replacing turn signal bulb with led directly, led bulb for the car lamp whatever decode or not. 12V car led bulb, Signal light, Stop light, Tail light, Reverse light. This LED bulb has a built-in electric fan for heat dissipation.  I recommend it not work in colsed or sealed environment.
22 watt LED light bulbs for cars, LED turn signal and back-up light bulb for both motorbikes and cars. These are SUPER EASY to install. There is no modification needed at all. Since LED lamp has + and - terminals, so if there is no lighting after inserting it into socket, just simply change the terminal oppositely.
Special Note: This LED bulb is best one use for turn signal lights, Just directly replace the halogen bulb, It don't need to add a pair load resistors to prevent hyper flashing or malfunction problem.

Base option: 1156,  3156, 7440 option
Using 45 pcs 3030 led chip
Consume wattage: 22 Watt
AS 20~45 watt halogen bulb replacement, replacing turn signal bulb with led directly, Not neet extra  resistors, led turn signal bulbs with built-in resistors.
Light output 2000 lumens 
Input voltage: 10~14V DC
Colors: Warm White 1816K color temperature 
Dimension: T20.
Lifespan: 50000 hours
Vibration resistant
Immediate response on/off

The steps of replacing front turn signal bulbs:
1.Left headlight.
2.Remove the turn signal rubber cover from the headlight housing.
3.Press the retaining catches together and pull the bulb holder straight out.
4.The bulb holder and bulb must be replaced as one unit.
5.Position the bulb holder in the socket and push it into place.
6. Put the rubber cover back in place.