G4 Back pin LED, 37mm 25mm Extended Long Back Pin G4 LED for marine boat lights, boat lights interior 24V, Back pin g4 led replacement, Back mount with bi-pin G4 LED bulbs

G4 Back pin LED, 37mm 25mm Extended Long Back Pin G4 LED for marine boat lights. Back pin g4 led replacement, Back mount with bi-pin G4 LED bulbs are used in various light fittings and are very useful for replace traditional g4 incandescent light bulb.. Marine led bulb, 24V Boat led bulb.  Directional G4/GU4 Socket (Back Pin) LED light bulbs, G4 base Bi-pin LED Light Bulbs for cars homes for sale as G4 Xenon bulb and G4 halogen bulb Replacements. This bulb using 9 pcs 5050 SMD (max 0.2 watt each LED) power LEDs, Consume wattage: 1.5 Watt. LED replacement bulbs for xenon G4 bulbs, LED G4 Light Bulbs for Cantalupi Lights, Cabin Lights and Imtra Lights. Dimension:28 mm diameter x 18 mm thickness including pin. As 10~15 watt G4 Xenon bulb replacement and 10~15W halogen bulb replacement.

Usually, On a boat DC 24V system, Voltage on the charger goes up to approximately 29V DC, Short voltage spikes will be over 32V. So many customer buy DC 24V or AC 24V operation voltage LED bulb was keep blowing when turn On/off. Our sppecial design LED boat lights interior 24V are using 50V withstand voltage for capacitor and LED driver IC.

Marine Bulbs are light bulbs that are designed for use in marine applications such as boats, yachts, boat slips, marinas, etc. Specific applications for marine bulbs are chart lights, underwater spreader lights, hull lights, navigation lights, courtesy lights, engine lights, etc.

For the Machine lighting system, The Short voltage spikes of 24V boat will over 30V. For example DC 24V boat light system, The operation voltage range of led bulbs must be from 24 volts to 40 volts. For For example DC 36V boat light system, The operation voltage range of led bulbs must be from 36 volts to 60 volts.
AC/DC 12~30V voltage operation.
Luminous Flux: 150 lumens,
Warm white Cool white option
120 degree beam angle.
RA>80

Base option: Back pin JC G4 Bi-pins, Side pin JC G4 Bi-pins

We have 3 kinds of G4 pin for this items, Please make a comments that tell me which one you like it:
1mm diameter pin, insert tightly standard G4 holder.
0.64mm diameter pin, it is for standard G4 holder
0.5mm diameter pin, Insertion is a bit loose for standard G4 holder

Below photo is a boat lights interior fixture, the maximum diameter of the bald can only be 11.5 mm and the Length of the bulb itself can only be 27 mm max plus the length of the pins being 8-10 mm. If buy less 11.5mm diameter led bulb as Marine G4 halogen replacement, The brightness will be not enough. The best recommends is buy this 25mm Extended Long Back Pin G4 LED bulb boat interior light.