24W ETL listed phase dimming LED bulb 2D fluorescent retrofit 5 CCT Switching change color temperature, 2G11 2G10 2G7 Gr10q 4 pin led replacement

24W 5 color temperature bulb, ETL FCC Certificated SCR phase dimming LED bulb for replacement for Dimmable Osram Philips fluorescent bulbs. Five CCT colors are is selectable Select the color temperature you want to use by flipping the switch prior to installing your lighting. Replace 2D fluorescent tube with LED bulb, 2G11 2G10 2G7 Gr10q 4 pin led replacement, Retrofit fluorescent LED, 2D retrofit led and 2D LED replacements. 2G11 2d 4-pin led replacement, 2d 2-pin LED replacement. 2d 4-pin led replacement, 2 pin 2 pin led replacement. AC120V Triac dimmable LED bulb 24 Watt 2G11 LED 2G10 led tube with 45 watt CFL replacement, Retrofit fluorescent LED, 2D retrofit led and 2D fluorescent LED replacements.  2D 4-pin led replacements, 2d fluorescent replacement and 2D LED retrofits that may be employed when replacing an old fluorescent lamp.. Switching change color temperature 2700K-3000k-3800K-4400k-5000k as replacement of Philips scene switch Ceiling light.

Dimmer compatibility test 
Test Condition: Vi: AC110-120V 50/60HZ Pi:15W@120V PF>0.9,  flicker less than 10%

compatiable below list dimmer:
Lutrun dimmer:
DVCL-153P
MRF2-6CL
DV-603PG
MSCL-OP153M
S-600P
S-603P
MACL-153M
CTCL-153P
SCL-153P
MSCL-VP153M
DV-600P
SFSQ-F

LEVIN Dimmer:
6672
6674
6631
6633-PLW
6633-P
6161-A
IPL06-10Z

EATON Dimmer:
DAL06P

2G10 LED bulbs that have four pins of standard base. plugs directly into the fluorescent prong receptacles. It doesn't use energy-wasting ballasts. It is estimated to be 55 percent Energy Savings, No fluorescent paint or gas contamination of the premises. Green Light Source, Bypass expensive ballasts and Wire Direct. How to make use of LED T5 and U-Shape Fluorescent Tube LED Replacing. What is the best way to make use of LED lights to replace small fluorescent bulbs.

1.) LED Chip Utilizing Osram led chip

2) Dimension: Square shape 120mm x 120mm x15mm, Round shape 170mm diameter

3)Input Voltage: AC120V 60Hz

4) Luminous flux: >2000LM, Ra>80

5) Life Time 30k Hrs

6.) Color Temperature: 2700k, 3000k, 3800k, 4400k, 5000k color temperature selectable, Pick a color temperature of five by the a flip of a switch before installing your light

7.) Power: 18~20 Watt

8.) The socket: wire conect as 2G11 2G10 or other

9.) Dimming led bulb replaces Osram as well as Phillips phase dimming fluorescents 45W

It is easy to put in, and remove/ bypass your ballast Please carefully examine the dimensions of the bulb to make sure that the power and voltage are compatible before making an offer. Ballasts should be dismantled or bypassed prior installing the LED bulb. If there's an existing ballast attached to the fixture, it is essential to take it off prior installing your led bulb.Otherwise the bulb may be likely to flicker.