36W LED PCB board use 9V High Volt LED Chip parallel directly in order to avoid one being defective and the whole light will not turn on

LED light PCB board, 12V constant voltage PWM dimmable LED light for DC dimmer. 12V LED light that uses 9 V High Volt 2835 SMD chip to connect parallel LEDs directly, Avoid one light that is not working and the whole light will not turn on.

3 LEDs are wired in parallel so that they share a current-limiting resistor as shown in Figure. More than all 3 LEDs (with the same resistor) are connected in parallel with the Power supply.

LEDs in parallel using LEDs that are connected using a High Volt 2835 SMD Chip, It is possible to expect a variation in forward current from one LED to the next. The variation might be reduced by using LEDs from the same production lot, but manufacturers do not rely on this and use "binning" to sort LEDs into matched lots for sensitive applications.

The High Volt 2835 SMD Chip 1W 130-140lm has option 3V 6V 9V 18V 36V.High high brightness, compact design and the industry standard smd packaging 2835 0.2W 0.5W 1W, with a variety of Volt options of 3V6V9V 18V 36V to meet the wide variety of lighting applications. Compact and high-quality design that is extensively used in numerous lighting applications.

Please contact us If you need 24V 28V 32V 36V 48V LED light using High Volt 2835 SMD Chip to parallel LEDs directly.

Below listed are Different color temperature option, But the price and MOQ for other color are quite different, Please contact us.
Golden light 1600-1800K
Warm white to yellowish 2600-2800K
Warm white 3000-3200K
Neutral white 3900-4200K
Cool white 6000-6500K
Cool white 10000-12000K
red color 620-625nm
blue color 465-475nm
Yellow color 590-595nm
Orange 600-605nm
Emerald green 520-525nm
Yellow-green light 570-572nm

Chip leds 36 pcs
36 LEDs Connect in Parallel
Size: 76mm x 76mm
Color Rendering Index: Ra>80
Color Temperature:
Warm White 2800-3200K, Cool White 6000-6500K, Nature white 4000k~4500k
Beam angle: 120 degree
Lifespan: 50,000 hours Housing
material substance: Aluminun
Thickness of material: <1.5mm
Certification: CCC CE and Rohs
Notes:
1. The led lighting board is able to directly function on DC 12V. Contact us if you need 24V 28V 32V 36V 48V LED light using high Volt 2835 SMD chip. connect parallel LEDs.
2. LED PCB board lighting source Aluminum plate base board has to be used with a heatsink as well as a cooling fan. Most Aluminum and housing bodies made of coper are good heatsink.
3. Check that the wire's and LED welding temperatures are less than 85 It is recommended to keep the temperature below 85degC Celsius