9W LED light PCB board use 9V High Volt 2835 SMD Chip to parallel LEDs directly in order to avoid one being defective

 LED light PCB board, 12V constant voltage PWM dimmable LED light for DC dimmer, 12V LED lights using 9V high Voltage 2835 SMD chip to connect parallel LEDs in order to avoid one being defective and turning off all lights simultaneously.

Figure shows three LEDs connected in parallel and sharing one current-limiting resistor, connected directly to their respective Power supplies and connected in series to each other via parallel wiring.

LEDs connected in parallel using the High Volt 2835 SMD Chip have the potential for fluctuating forward current, which could be minimized by selecting LEDs from the same manufacturing lot; however, some manufacturers utilize "binning" techniques instead for more sensitive applications.

The High Volt 2835 SMD chip 1W 130-140lm comes with three voltage options; 3V 6V 9V 36V. With high brightness, compact design, standard SMD package 2835 0.2W 0.5W 1W and various voltage options between 18V 36V the High Volt 2835 SMD chip meets all lighting requirements of any application imaginable. Compact yet high quality design make these an essential part of the lighting market today.

Please contact us If you need 24V 28V 32V 36V 48V LED light using High Volt 2835 SMD Chip to parallel LEDs directly.

Below listed are Different color temperature option, But the price and MOQ for other color are quite different, Please contact us.
Golden light 1600-1800K
Warm white to yellowish 2600-2800K
Warm white 3000-3200K
Neutral white 3900-4200K
Cool white 6000-6500K
Cool white 10000-12000K
red color 620-625nm
blue color 465-475nm
Yellow color 590-595nm
Orange 600-605nm
Emerald green 520-525nm
Yellow-green light 570-572nm

9 Connects in Parallel. Size 46mm in Diameter; Ra80 Color Rendering Index and Temperature.
Warm White 2800-3200K and Cool white 6000k, Nature White 4000k-4500k, both with 120 degree beam angles. Their life spain time is 50,000 hours with Aluminun material composition containing  <1.5mm thickness.
1. This led lighting board can run directly of DC 12V power source. Please contact us if you require 24V, 32V, 36V or 48V LED light that uses high Volt 2835 SMD chip lighting that connects parallel LEDs.
2. LED PCB board light source Aluminum plate base boards require both a heatsink and cooling fan for proper functioning, with aluminum and coper housing bodies being ideal options as heatsinks.
3. Verify the wire and LED welding temperatures are under 85DegreeC for proper welding operations