9W 6.2" CFL led retrofit G23-2 GX23-2 G24D G24Q E26 B22 E27

9 Watt AC 110 AC 220V, AC277V LED replacement lamp, G24D LED bulb, G24Q LED lamp, g23 LED replacement G23 2-pin bulb gx23 LED retrofit. Retrofit LED fluorescent light CFL led retrofit single side lighting single-sided PL light similar to CFL bulb 9 watt LED house light bulbs that are 18 watt CFL replacement.

Triac dimmable and non-dimmable option

Dimension: Refer to image Specification:
1.Power Consumption:  9 Watt
2.Voltage AC 110 or AC 220V AC85~300V alternative
3.LED Quantity:  28 PCS 0.5 WATT High Brightness SMD LED
4.Light Base: G23, G23-2, GX23, GX23-2, G24D, G24Q, E26, E27, B22 option.
5.Color Temperature: 3000-3500K 4500K, 6000-6500K as an option Please select from the blow options that are listed
6.Power Factor: greater than 92%, around 98 percent. Working Temperature: less than 68 degrees Celsius,
7.Working conditions, temperature ranging from -30 degrees to +40 degrees,
8.Luminous Efficiency, 110 LM/W average.
9.Lumen Flux 990 Lm in cool white.
10.View Angle: more than 120 degrees.
11.Materials made of lathed aluminium as well as ABS anti-fire.
12.CE and RoHS Certificate.Two years of warranty.
13. Lifespan : longer than 30,000 hours.

14. CRI >82

Awareness for applications:
For the CFLs with integrated circuits you just need to connect LED bulbs. For non-integrated electronic ballast CFLs they are electronic ballasts you must take out the ballasts, and then plug into the replacement LED bulb. If not, the LED bulb is defective. However, if it's a magnet ballast (means that it is connected to starter) It is necessary to remove starter. You may also take out ballast, but not ballast. But If you take out ballast, efficiency will improve and will save energy.

1.No ballast is required. All ballasts should be removed prior to installation!
2.The lamp isn't water-proof.
3.The temperature of the socket is 65 degrees, so do not contact the aluminum or any other component during work.
4.The product is not able to be put in garbage directly. Therefore, the necessary steps should be taken to ensure full recycling.
5.All installations, maintenance, and removal, and installation should be performed by a certified technicians.
This product functions as an alternative to the traditional plug-in tubes that save energy. lamp. It is suitable in restaurants, hotels commercial and home lighting, etc.

Click here to learn how to make use of LED lights to replace compact fluorescent lamps. For CFLs that are integrated, you simply connect LED bulbs. For non-integrated electronic ballast CFLs they are electronic ballasts you must take out the ballasts, and then plug in the replacement LED bulb. In the event that it is not, the LED bulb is defective. However, if it's a an electronic ballast (means that it is connected to starter) It is necessary to remove starter. You may also remove the ballast or not remove ballast. However, If you take out ballast, efficiency will be higher and will save energy.