G12 LED bulb G8.5 led bulb replacement 16W G12 led retrofit as Philips Mastercolour Cdm-Tc replacement and Osram halide lamp replacement

G12 LED bulb or G8.5 led bulb replacement, cdm-t led replacement, LED T6 G12 Base or G8.5 base replacements, G12 led retrofit lamp, G12 LED replacement bulbs, G8.5 LED retrofit for Osram halide lamp replacement, LED bulb G12 base, LED bulb G8.5 base, T6 G12 led bulb, 16 watt G12 LED light bulbs,  G8.5 Bi-pin LED lights bulbs for home use.  G12 LED bulb as replacement of PHILIPS MASTERColour CDM-TC 120W/942, CDM-TC 120W/930. G8.5 LED bulb as replacement of PHILIPS MASTERColour CDM-TC 120W/842, CDM-TC 120W/830

CE RHOS approved.

Housing Metal: Aluminium + Ceramic
LEDs:using 120 pcs Epistar 2835SMD LEDs
Demension(D×H) mm: 30*103 (H)
Input Voltage option: Multi voltage, AC100~277V, AC 85~265V, AC 110V / 60Hz triac dimmable, AC 220V / 50 Hz Triac dimmable

 Wide voltage and constant current design, It can work on Mains voltage at AC110V, AC120V, AC220V, AC230V, AC240V 50Hz/60Hz And all other mains voltage between AC 85V and AC 265V.
Wattage: 16W
Beam angle: 360 degree
Colour rendering index(Ra): >80
Colour temperature(K): 2800K-6500K
Average Lifetime(Hr): 50000
Luminous Flux(Lm):  >1600Lm

G12 or G8.5 Bi Pins option

INSTALLITION G12 led retrofit: Replaces high-intensity discharge HID metal halide MH or high-pressure sodium HPS. Please bypass or remove the ballast in the fixture. Reduce the need to hire expensive lifts. Easy to retrofit. Please disconnect or remove the ballast before using the Bi-Pin led bulb. By removing the ballast you save more energy and increase reliability. Please make sure to remove the wires off the ballast, trigger and capacitor so that there is no way that high voltage could be connected to the socket. If possible please remove the ballast, capacitor and trigger from the fixture. Please do not operate in an enclosed or restricted air fixture.