15W G12 led replacement bulbs as MASTERColour CDM-TC and OSRAM Metal Halide Replacement Bulbs

15W G12 led replacement bulbs replace MASTERColour CDM-TC 70W/942 930. G12 Bulb ac100-277v, LED bulb G12 Base, 15 watts G12 Bi pin LED lights bulbs. G12 LED replacement bulbs for PHILIPS MASTERColour CDMTC 70W/942, CDMTC 150W/930. The G12 LED lamp can be used to replace the metal halide lamp. CE RHOS approved.
G12 lamp Osram replacement, LED bulb G12base as OSRAM Metal Halide, G12 lamp Osram replacement, G12 bulb, G12 LED bulb, as OSRAM Metal Halide Replancement Bulbs, G12 Bulbs, G12 Bulbs. Bi-Pin Metal Halide Replacement LED Bulb - G12 Base Metal Halide Bulbs, G12LED bulb as OSRAM Metal Halide Replacement, G12 Lamp Osram Replacement, G12 Bulbs G12 LED Replancement Bulbs. This replaces the traditional G12 halogen reflectors or halogen capsules used for general lighting purposes.
Housing Metal: Aluminium
LEDs:using 144 pcs Epistar 2835SMD LEDs
Demension(D×H)mm: 30*128mm(H)
Input Voltage: AC100-277vV Wide voltage and constant current design, It can work on Mains voltage at AC110V, AC120V, AC220V, AC230V, AC240V, AC277V 50Hz/60Hz And all other mains voltage between AC100V and AC277V.
Wattage: 15W
Beam angle: 360 degree
Colour rendering index(Ra): >80
Colour temperature(K): 2800K-6500K
Average Lifetime(Hr): 50000
Luminous Flux(Lm):  >1500Lm

INSTALLITION G12 led retrofit: Replaces high-intensity discharge HID metal halide MH or high-pressure sodium HPS. Please bypass or remove the ballast in the fixture. Reduce the need to hire expensive lifts. Easy to retrofit. Please disconnect or remove the ballast before using the Bi-Pin led bulb. By removing the ballast you save more energy and increase reliability. Please make sure to remove the wires off the ballast, trigger and capacitor so that there is no way that high voltage could be connected to the socket. If possible please remove the ballast, capacitor and trigger from the fixture. Please do not operate in an enclosed or restricted air fixture.