Currencies

Categories

Who's Online

There currently are 101 guests online.

5W LED house ligths bulbs, 7" CFL LED bulbs, different base, OEM

(image for) 5W LED house ligths bulbs, 7" CFL LED bulbs, different base, OEM
5W LED house ligths bulbs, 7" CFL LED bulbs, different base, OEM
(image for) 5W LED house ligths bulbs, 7" CFL LED bulbs, different base, OEM
5W LED house ligths bulbs, 7" CFL LED bulbs, different base, OEM
  • Model: 5W-7INCH-PL-24-SMD5050-OEM
  • Shipping Weight: 0.4 lbs

(image for) Ask a Question

$5.00

Please Choose:

The light output Color Temperature and Angle

Color Temperature






Base or Socket of Lamp








Min:  10
Add to Cart:

5 wall LED light bulbs as CFL replacements. Dimenion L:158mm W:35mm H:35mm for 7 inches and above down lighting fixture Specification : 1.Power Consumption: 5 Watt. 2.Voltage:AC100V-AC265V, 3.LED Quantity:24PCS High Brightness 5050SMD LED, 4.Light Base: LED light bulbs for home, G24D-1/g24D-2/LED light bulbs for home, G24D-3 /LED light bulbs for home, G24Q-1/g24Q-2/LED light bulbs for home, G24Q-3/E27 option, Please choose from below listed 5.Color temperature: 3000-3500K, 4000-4500K,6000-6500K option, please choose from blow listed 6.Power Factor:larger than 92%,Working Temperature:smaller than 68 centigrade degree, 7.Working environmental Temperature -30 degree to +40 degree, 8.Luminous Efficiency,70 LM/W on average. 9.Lumen Flux:450LM 10.View Angle:larger than 120 degree. 11.Materials of lathed aluminium and ABS anti-fire. 12.Standared size of two pins and four pins. 13.CE & RoHS Certificate.Two years warranty. 14Lifespan :larger than 30,000 Hours. Warning for applications: For the Integrated CFLs, You just plug in LED bulbs. For the Non-integrated electronic ballast CFLs, If it is electronic ballasts, You must remove the ballasts and then plug in the LED replacement bulb. Otherwise, The LED bulb will be fault. But if it is magnetic ballast (means that with starter), You must remove starter, You can remove ballast either not remove ballast, But if you remove ballast, The efficiency will be more better and saving energy. 1.No ballast is needed. Any ballast should be removed before installation! 2.The lamp is not water-proof. 3.The socket temperature peak is 65 degree, do not touch the aluminum or any part while working. 4.The product cannot be discarded into garbage can directly, necessary measures should be done for full recycling. 5.All installation, maintenance, dismantling should be done by licensed technician. This product works as a replacement of traditional energy saving plug-in tube lamp. It can be widely used for hotel, restaurant, commercial & home lighting etc.


Your IP Address is: 3.142.98.111
Copyright © 2024 www.ledlightbulb.net/. Powered by Zen Cart