AC110V~250V, Infrared PIR Sensor Switch

AC110V~250V,  Infrared PIR Sensor Switch, Automatic Infrared PIR Motion Sensor Switch For lighting light 

Summarization:

 

•The human body is an infrared detection sensor switch controller, the use of infrared detection control the load of the switch.

•Users according to actual needs, the human body sensors installed in the appropriate environment

 

 

Technical parameters:

•Working temperature: -20 to +60 

•Supply voltage: AC100V~AC250V

•Sensing distance: 0~ 8 M

•Ham should angle: 110~140 degrees.

•External dimension:     mm

•static power consumption: <1w

•output load: LED bulbs, CFL bulb and incendescent bulb

 

Direction for Use

 

•Connect the load wire at first, following by the power wire; Please ensure short circuit can not occur between connecting wire before you turn on the power;

•when the detected light up when the load was light, when people leave after 10 seconds,  load lights automatically turn off.

•The controller signal output line and input line should be connected correctly.