Single address / broadcast DALI BUS POWER SUPPLY DALI signal lighting Dimmersedswitch for simple DALI compatible light fittings

Single address / broadcast DALI BUS POWER SUPPLY DALI signal lighting Dimmersedswitch for simple DALI compatible light fittings.

Single address Broadcast DALI
Broadcast DALI is the simplest way to control DALI lighting when individual addressing or grouping of lights is not required. Using this simple means of control, the DALI lights operate together.
There are also situations in which lighting only needs to be switched on or off, or needs to be dimmable. For these applications DALI Broadcast will suffice. It’s a simpler solution, both in terms of use and installation. The word broadcast speaks volumes, because this means that all the fixtures are controlled simultaneously from a single point. The solution can be wired, wireless or a combination of the two. The individual fixtures don’t need to be programmed separately.
DALI broadcast controllers, dependent on option chosen, can control from 1 to 100 drivers on a single DALI line/universe. This allows ‘group’ (broadcast) control via a rotary switch, push button, scene control, or similar. which can be controlled with a physical switch or an app for mobile phones or tablets.

Function description: Click: If you are in brightness mode, click Yes. If in color temperature mode, only beat excellent temperature mode, switch to brightness mode. And there are indicators. Double-click: In the brightness mode, double-click to enter the color temperature mode, and the indicator is on. Clockwise rotation: In brightness mode, clockwise brightness increases, and in color temperature mode, clockwise rotation warms the color temperature. The indicator blinks during the process. Counterclockwise rotation: In brightness mode, counterclockwise brightness decreases, in color temperature mode, counterclockwise rotation, color temperature becomes cold. The indicator blinks during the process. Note: Brightness range: 0.5%-100%. Color temperature range: 2700K-6500K. Contact us for Manual pdf file.

Dial code function:
When S1 dials to 0~3, the device can control a single address, which can control up to 0~63
addresses. Such as:
1. When S1 and S2 are all on 0, you can control 0~15 addresses (means 16 pcs devices) by changing the dial arrowhead (0~F) on the S2 (The device’s address needs to be the same as the dial arrowhead). The address would be 0~15.
2. When S1 is on 1, you can control 0~15 addresses (means 16 pcs devices) by changing the dial arrowhead (0~F) on the S2 (The device’s address needs to be the same as the dial arrowhead).  The address would be 16~31.
3. When S1 is on 2, you can control 0~15 addresses (means 16 pcs devices) by changing the dial arrowhead (0~F) on the S2 (The device’s address needs to be the same as the dial arrowhead). The address would be 32~47.
4. When S1 is on 3, you can control 0~15 addresses (means 16 pcs devices) by changing the dial arrowhead (0~F) on the S2 (The device’s address needs to be the same as the dial arrowhead). The address would be 48~63.

Grouping:
You can control the devices by the group when the dial arrowhead of S1 points to 4 or A. Set S2 dial arrowhead (0~F) to control each group from the 16 groups

Broadcast mode
The broadcast model can be set when the S1 dial arrowhead is points to 5 or B~F, the S2 can be random.

Single address mode
When S1 dial to 6~9, it can control a single address, it can control up to 0~63addresses.
Address calculation: when S1 dials to 6, the address is (S1- 6) *16+S2. Such as:
The power supply address is 15, then you can set them: S1 dials to 6, S2 dials to F. By analogy, the other address setting are as same as the single address operation above.